Serious Lathe DOA

[Dale Winburn]

I have a friend with a Serious Lathe that just quit. The VFD seems completely dead, no error codes, no nothing. Does anyone have any ideas? Does A VFD have fuses inside? He was coring a 12" bowl blank when it happened. I will be going to his shop Friday so I can check anything.

Thanks for any help and suggestions,

Dale Winburn

[Roger Chandler]

Dale, an email to Scott Trumbo will yield proper input on this .....also Tom Zepada in Front Royal is now an East Cost Serioius representative for Serious. Scott is a standup guy, and will do all he can to help.....he values his customers and the Serious Toolworks reputation.
His email is trumbo1@comcast.net

[John King]

Call the lathe or VFD vendor for advice/troubleshooting. In my opinion, they provide the most reliable information. - John

[Olaf Vogel]

I assume you checked for the obvious with a multimeter?

- power from the wall
- all wires connected to the VFD
- fuses, if any