Single Brain Cell Sketch Up has come up with a few "details" for the Pantry Project..
Next payday, I go out and buy a sheet of 3/4" plywood....and have the BORG do two cuts....3 pcs @ 48" x 33". I can then cut one or two of those into shelves, add a pine edge. maybe something like 3/4 x 30" x 14" deep. Depending on the pine edge piece.
Face frames do NOT need to be 3-1/3" wide along the door, top and bottom..maybe, but not the sides. I can resaw one of the 1 x 4 x 6' into the two sides, another to make the top and bottom pieces. I have three of the 1x4s.....maybe some webframes to tie the top and bottom of the sides together. I have those resawn pieces..the shorter ones, to help build the frames. Longer ones will help build the two doors.
All I have to do is figure out what style of doors to make.
Good thing I have a new bandsaw blade....