Have 5 HP Laguna band saw and cut large green bowl blanks up to 8" thick. Would like advice on what blade to buy and from whom for a reasonable price. Thanks
Have 5 HP Laguna band saw and cut large green bowl blanks up to 8" thick. Would like advice on what blade to buy and from whom for a reasonable price. Thanks
Recently, past two years, I've used both the Timberwolf AS blades and the Lennox Die Master II blades. Both 1/2", 3 tpi. I too use them for thick, green blanks. For me they both cut fine but the Lennox stays sharper longer. I've certainly have not done a documented results based report on this, it's just my simple observation. Both of these blades are manufactured just for this application.
Tony
"Soldier On"
For the last several years, I have purchased blades from http://www.woodcraftbands.com/
Service and prices are hard to beat. James was the fellow cutting the blades and may still do so. I usually buy the 3/8” X .025 4S (skip tooth.)
Left click my name for homepage link.
This is the blade I use for bowl blanks, especially wet ones.
Lenox Wood 32 from Cyber Woodworking Depot / Toolcenter.com
http://www.toolcenter.com/index.php?...r=32+wood&pg=5
[SIGPIC][/SIGPIC]
Please see personal profile for website info.
I have the Laguna 16HD. Mostly I use it for cutting slabs. I use a 1 1/4 inch wide with teeth at 3/4 inch apart for ripping slabs, I use a smaller saw (1/2 by 3 tpi) for cutting circles. I use the Lennox blades on both saws. They cut far longer and straighter than any other blades out there, and can be resharpened many times. A bit more money, but well worth it. I have a saw shop sharpen my blades, costs about $9 for the big blades.
robo hippy
Bob, I also use Lennox blades. For green wood and turning blanks up to 12" thick I use 1/2"x8-tpi. [Edit: this should be 3-tpi. Sorry!] A local business welds up blades to order at a good price, sometimes while I wait. And I think driving there is cheaper than shipping. Perhaps there is a similar service in your area.
JKJ
Last edited by John K Jordan; 06-15-2017 at 11:35 PM. Reason: Typo
The 8-tpi was a typo. Yikes, that WOULD be a struggle!
I meant to type 3-tpi. Please forgive for the confusion. I'll try to correct the message.
BTW, this evening I re-read a note from a gentleman named Brian Hahn about how he prepares a new bandsaw blade for cutting thick wood. Starting with a 3-tpi blade he uses a grinder to remove every other tooth. This gives a 1.5-tpi blade. I really need to try this - it makes a lot of sense.
He said he used a 1/4" wide grinding wheel. I suspect this is the type of wheel used for sharpening chain saws or the thicker one made for lowering the depth gauges. The chain saw sharpener I use should be perfect for this anyway.
JKJ
I like John Keeton use blades from http://www.woodcraftbands.com/. He sells a 1/2" wide, two tooth, hook blades .032 thick for cutting wet rough wood and they do cut very nicely. Priced very well also.
I use Ellis Blades 1800-383-5547. They make their Blades. Great quality and even better pricing. Give them a call
Highland Hardware/Woodworking sells a blade intended for wet wood. I've never had a need for one so no idea how they work.
http://www.highlandwoodworking.com/w...dsawblade.aspx
I also use the Woodturners blades from Highland Hardware. They are superb! They have a wider teeth set for clearing the kerf, are .032 thickness for strength, have 3 tpi, and are wonderful for turning the curve, as they are 3/8" wide, which will turn a tighter radius than a 1/2" blade. I usually have a blade last for a year or so without sharpening. I highly recommend.
Remember, in a moments time, everything can change!
Vision - not just seeing what is, but seeing what can be!
My 96 inch 3 tpi 1/2 inch blades are about $28. I think the 150 inch blades for the big saw are about $70. You can for sure find cheaper blades, but dollar wise, the bimetal blades give you far more for your money. Carbide tipped blades are a waste unless you are cutting fine veneers.
robo hippy
Personally, I don't see the utility of cutting bowl blanks into perfect circles on the bandsaw. Rounding an octagon or hexagon on the lathe is easier than cutting the circle on the bandsaw. Maybe if your lathe is near capacity or you're cutting the blanks from a precious board and want to save every scrap of wood.
As far as blades go, the best one depends on your saw. But for cutting turning blanks, imo, you want the widest and thickest band your saw can take. The limiting factor is really wheel size more than anything else. A smaller wheel will fatigue wider and thicker bands. On mine I have a 1.25", .40" thick Lenox bimetal blade (and I love it). But my saw has 24" wheels.
The bimetal blades are great, and you absolutely should end up using one. But I would recommend starting with regular blades until you're sure you like that size/thickness/tooth spacing and have had a little bit of practice with it.