I am making a large jewelry box for SWMBO. The design involves convex curved sides. To accomplish this, I purchased a neat jig which actually works quite well making those curves: http://www.convexcurve.com/band-saw-tool.html (And, no, I don't have any association with that company other than buying their product.)
The problem is, the box I am building is about 18" long (which, when stood on its end translates to 18" of resaw capacity needed, plus about 1-1/2" extra for the jig - hence a 20" or greater resaw capacity bandsaw). I didn't think of this at the time, and my 14" Laguna SUV clearly won't fit the box.
So, long story short, I need to make 4 quick curves cuts on a bandsaw that's at least a 20" one (if not even a larger one).
Does anyone in the Tampa Bay / St. Petersburg / Clearwater Florida area have one that they wouldn't mind me coming over to make those cuts with the jig? If so, please send me contact info via private message. Thanks in advance. I'm hoping to make a nice present for my significant other for her birthday.