It's 90+ here! I've re-done all the program temps to 68 AND set the "hold" temp to 68 also. The AC, when it does kick on, seems to only run for a few minutes and then kicks itself out of the hold temp and programming and resets the temp to 85!

For awhile it seemed to also show the inside temp as 53! It was more like the 85 it was trying to hold to. Had to reset the hold temp to 50 and it kicked on for a short while again. Then started showing a more normal temp of 71-72, but I'd say it was really more like 80. Still kicking out to 85 which naturally shuts the AC down. Not good.

No ice on the outside unit's hose which usually means low freon. Can't see the inside evap if it's iced up or not. I'd say it probably is with these weird readings?

Too much freon? Something else going on?