I edge plane face frames, rails/stiles, drawer boxes on a 4 post 15" planer with spiral cutter. I first straight line on the TS then rip to final width + 1/8", then face joint if needed, then finish up thicknessing faces and edges on the planer. For me, edge planing groups of boards is faster and less tedious than edge jointing one board at a time. I'm not a production shop and pretty much do what feels best, which is not always the quickest or fastest. One of the advantages of only answering to myself.
That Martin T90 in Joe's vid is awesome but probably costs more new than most or all of my tools put together
Scott Vroom
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.