[OP]
Member
I just reinstalled my original 80 Watt Reci tube. It is almost six years old*. It has about three years of use and three years of storage. It is still working like new. I measured its power at 82 Watts while running at 22 mA.
*Actually it is six years old, it was built in July 2011, I received it in early August.
Last edited by Rich Harman; 07-28-2017 at 5:35 PM.
Shenhui 1440x850, 130 Watt Reci Z6
Gerber Sabre 408
Second person that had stord for several years and then used tub again. Good to know
Woodworking, Old Tools and Shooting
Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
SFX 50 Watt Fiber Laser
PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
Powermatic 100-12 planer, Rockwell 15-126 radial drill press
Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others
Member
My 80W RECI is 5 years old and has been used on and off over the years. Some times it runs 12 hours in a day. Still good as new.
G. Weike LG900N 100W RECI RDWorks V8
Leiming LM2513FL 1kW Raycus fiber laser cutter
Wisely 50W Raycus engraver
Posting Permissions
Reply With Quote