Hello all,
I am looking for advice/help and maybe it was already given, but a simplified explanation would be appreciated.
I am making a simple entertainment center (read coffee table with shelves) out of walnut veneer plywood. I was looking for a simple way to keep the beautiful dark color, have it look nice and be protected(i have a 2yr old, i'm sure there will be spills. People talking about 9+coats with mixing different dyes for 3 of the coats, is a bit beyond my current level (first time making something). I was hoping for a more simple process. This was the best help i have found after quite a bit of looking and was hoping if you guys could help me nail this down. My rough interpretation of a simplified method was to use Shellac and then seal it (this was recommended to me: oil based ARM-R-SEAL urethane topcoat) and there is quite a bit of shellac options, so if someone could point me in the right direction for that as well it would be much appreciated.
Thanks