Thought I would unpack mine, and set up for making a groove..
IMG_1743 (640x480).jpg
I set this little box on my bench, and open the lid..
IMG_1741 (640x480).jpg
Ok, I take the fence and the sliding stock, out of the box...
IMG_1740 (640x480).jpg
Which leaves the "Main Stock"...set it aside
IMG_1738 (640x480).jpg
With this style of a box, there are a couple holes in that diagonal brace. They are for spare/unused nickers/spurs
I have two screwdrivers. The skinny one is for the spurs, larger one for the rest of the slotted screws. There are short and long rods, extra cutters, and the cam rest.
IMG_1742 (640x480).jpg
There are two rows of cutters. Currently, I have about..28 cutters.
Needed to set up for a groove..
IMG_1753 (640x480).jpg
I made sure the area the cutter will go, is cleaned and free of..crud, I select the size cutter I need, and install it.
IMG_1754 (640x480).jpg
This time around, I went with the short rods. I have a screwdriver just for this...slots are a bit worn out.

Part two, coming up...