Hello All,
I've made several feet of black walnut mouldings using hollows and rounds for the bracket feet of a Penna. spice chest project. I went on to create a matching scraper out of an old saw plate to scrape those moulding profiles. My problem is that my burnisher doesn't want to turn a burr on the scraper. I'm assuming the saw plate is too hard. Can anyone guide me through the process to convert the saw plate material into a suitable scraper that will take a proper burr. I have access to propane, map gas, oxy-acetylene, a charcoal forge and my wife's kitchen oven (as long as I finish before she gets home from work!). Thanks in advance for your guidance.