I've been using a folding Jobsite Saw from Sawstop for the last two years. For what it is it's quite good, but I've always wanted a real cabinet Saw from Sawstop.
My shop is a detached single car garage 9 1/2 x 20. I don't have the width to have the full Saw and still be able to walk through the shop. Decided that I rarely use the full rip width, plus I have a Tracksaw for sheet goods and really wide tips.
Used the tracksaw to cut 12 inches off the MDF insert, and drilled and countersunk two new mounting screws. I tried to use a hacksaw to cut off the metal bars that extended past the Saw. That wasn't really working, so I used an angle grinder with a cut off wheel, Grinder wheel and flap sander to trim it to size and smooth it off.
I now now have about 25 inches of rip capacity, and that really plenty. Plus I have the great T glide fence.
Anyone else try this?