-
I just picked up four planes to rehab, and a saw, this morning..
IMG_2238 (640x480).jpg
One steel, one iron,and..
IMG_2239 (640x480).jpg
A pair of "Goldenberg" woodies.....1-5/8 wide irons....the saw?
IMG_2235 (640x480).jpg
26" long, 8ppi, skew back crosscut, by Richardson Bros.
IMG_2236 (640x480).jpg
$9 total for the morning....
-
As for that #900 Milllers Falls plane...
IMG_2246 (640x480).jpg
Rear handle has been repaired..
IMG_2244 (640x480).jpg
Iron has been sharpened, flat on the back, chipbreaker mated to the iron. Edge has a bit too much camber, will correct on the next sharpening.
The little block plane..
IMG_2247 (640x480).jpg
Was unable to remove any of the knobs....rest of the plane cleaned and the blade sharpened...
IMG_2248 (640x480).jpg
Sole is flat enough, for a block plane..
IMG_2249 (640x480).jpg
And, it do make shavings....
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules