On a recent project, I was ready to cut some approximately 1” x 4” stock to finished length and decided I did not have a proper saw for the task. My small crosscut backsaw did not have enough depth of blade to saw through with the stock on edge and the pitch was too fine to efficiently cut across the 4” wide face. I have a Diston D-24 crosscut, but it was as much too big as the backsaw was too small.
I had not run into that problem before. I dug around on the net, but did not find what I thought might be the perfect midsized saw for crosscutting.
What do you all use? Thanks for your input.
TAB