I wanted to make a table for my planer which could also function as a workbench when not using the planer. So I threw together a 6ft x 2ft table with an MDF top. I bought some 4ft x 15in melamine to use as the outfeed table, and some shorter melamine to use for the infeed. I added risers to the bottom of the tables out of MDF and inserted T-nuts so that I could use 1/4-20 bolts for height adjustment. This will make it much easier to work with a jointing sled in the planer, and let long table top boards slide out safely and smoothly without me having to catch them. Hopefully reduce snipe a bit, too. I dont have the infeed table completed in these pictures.