Hello All:
After reading quite a bit on the internet and the Sam Maloof thread on this forum, I decided to try a DIY oil finish. I have mixed up 1/3rd Pratt and Lambert #38 (as suggested by Scott Holmes in that thread), 1/3rd pure Tung Oil, and 1/3rd mineral spirits. Those of you who have mixed up home brew similar to this yourselves, would you mind giving me input on how you applied it? From what I've read its pretty much what I'm used to with Watco and Tried n True: Flood the surface, leave it for a while (how long?) then wipe it down, and let it cure overnight. Any nuances with home brew?
Thanks,
Jim