hello to all:
this is is my first post on the site. I need some help on how to round over the side of a bench. The side is a 2x10 and i want to use a 3/4” rounding bit and do both sides to complete a full round over. My question is this. Once I shape the side with a jig saw will I’ve able to Rout the edge with a bearing attached. If my cuts from the jigsaw are not perfect will the bit just follow the contour and obviously not look that good or should I use the bit without the bearing. I have attached a photo so it may be easier to see what I’m saying
thanks for any suggestions