Hello Gents,
I have a rolling outdoor kitchen cabinet built from some old pecky cypress and some new cypress as well. It is about 8-10yrs old and the original finish is beginning to need some attention. I originally stained it (golden oak I think) and put a topcoat of spar varnish. I sometimes regret not applying a tung oil finish instead. What are my options at this point? Sand below the varnish and restain a possibly darker color and varnish again? Could I sand below the surface and apply a tung oil and have decent results? The only problem is the insides of the drawers, etc. are pristine.
Thanks in advance.