Hello All,
Showing photos of some of machines that moved with me when I downsized. Old shop was 20' x 28' plus that much more when needed. I will be showing my lathes benches and what I use to cut segments. I have 3 saws, one does rip and parallel cuts to do segments on the Dubby after the rips. There is a model saw, model disc sander and model drum sander for the small stuff that's not safe to cut on my larger saw. The Elu chop saw will do stave construction and cross cutting for under 7". (I miss my Delta Unisaw, jointer, planer and Powermatic bandsaw). Current shop is 10' x 24' and 1/ 2 half of a double garage. The garage is actually a 3 car garage. I have benches, tool boxes and closet maid shelves. I used horse mats for the 10' x 24' part. It has taken me a 1 1/2 years to set up the shop. Made a decision to have 220 wired in, insulation in the ceiling, and installed new insulated garage doors. Down to one car now which helps. Dust is a problem, in the future perhaps a dust collection system. Using vacs.now.