Andrew had mentioned the new Cabineo connectors from lamello on another forum. I finally got around to trying them, and I must say I am quite impressed how well they hold. The connectors are hammered into the groove, and the screw protrudes from the connector enough to help align the parts easily. I bolted these two cabinets together in less than 10min, and that was the first time I had tried these connectors. I had been using blind half dados, but these will reduce the cut time quite a bit and if you want to flat pack the panels for shipping this will save time there. I thought I would share.

Lamello site info: http://www.cabineo.ch/en/

I know it is melamine, egad. The stuff is flat, a reliable thickness, cheap, and pre-finished.

VAN-SH1.jpg

VANITY-BOXES.jpg