Hi there. I thought I’d share a project I had done for a client of three life size Canadian geese flying that are actually used as ceiling lights. I used a Cut 50 hand plasma cutter to cut the 1.2mm cold rolled steel for the geese. I wanted it to be as filagree as possible to let light through and to also allow me a easier time of hammering and shaping the pieces. After making the body, wings and feet I plannish them to the 3D shape of the light required and mit them together. I use silver Mica as a light defuser inside each goose. They’re now happily flying in formation on the the clients ceiling here in Australia. regards Richard Yates Richard Yates Sculptor