I am building a dresser for my granddaughter. There will be three drawers 35 inches wide by 15 inches long (into cabinet), 6 inches high using 1/2 inch material for the box and bottom. It will also have a false front. I would like to use the (undermount) Quadro slide 15" full extension slide http://www.cshardware.com/h-9134368.html rather than the comparable Blum slide ONLY due to cost. I've read many, many threads here to reduce my list to those two. The Blum recommends the lateral stabilizer which adds another $70-120 depending on vendor. There were no lateral stabilizers found for the Quadros unless I missed them.
Does anyone have experience with the Quadro slides on wide drawers regarding the lateral stability?
link to Blum slide
http://ahturf.com/store/index.php?ro...duct_id=118262
No affiliation with either vendor, just possible vendors.
Thank you in advance.