Page 1 of 2 12 LastLast
Results 1 to 15 of 20

Thread: Pirate Chest Build - Part 4 done (lots of pics)

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Feb 2011
    Location
    Carlsbad, CA
    Posts
    2,230
    Blog Entries
    2

    Pirate Chest Build - Part 4 done (lots of pics)

    Earlier parts of this build are described in previous, separate posts.

    This is the last part of the build; making the sliding trays that go inside the chest and carving a shell for the front of the chest.

    Here are the runners screwed to the inside of the chest that the trays will slide on.


    1 by Mike Allen, on Flickr


    Sawing the tray components to size at the bench hook and shooting the ends. I don’t always take the time to use the shooting board for all furniture parts, but these will be dovetailed so nice clean, square ends makes it easier for DT layout.

    2 by Mike Allen, on Flickr

    3 by Mike Allen, on Flickr

    4 by Mike Allen, on Flickr


    Here are the components for 3 rectangular trays: mahogany, cherry and some cool flame figured Maple.

    6 by Mike Allen, on Flickr


    Apparently the LOML thanks the shop is a perfect place for flower arrangements – I’m not so sure.

    7 by Mike Allen, on Flickr

    I’m a tails first guy – I like to use a tiny rabbit to help align the boards when describing the pins from the tails (sometimes called the 140 trick after the Stanley model fenced rabbit plane). I also like to pare inside corners of the tails to help the joint go together that glue up.

    8 by Mike Allen, on Flickr

  2. #2
    Join Date
    Feb 2011
    Location
    Carlsbad, CA
    Posts
    2,230
    Blog Entries
    2
    Here’s my set up for planing joints flush after assembly – in my twin screw, face vice with a supporting board. Every time I try and shortcut this step by not using a backing board I always gets spelching/chip out, so for me it’s worth the time to clamp up the backing board.

    10 by Mike Allen, on Flickr


    Here are the completed sliding trays. Finish is same as the rest of the chest; Watco oil/varnish followed by shellac and paste wax.

    11 by Mike Allen, on Flickr


    11 (2) by Mike Allen, on Flickr

    13 by Mike Allen, on Flickr


    14 by Mike Allen, on Flickr



    Here are the carved shells (described in a previous post), that serve as the handles for the chest installed.

    16 by Mike Allen, on Flickr


    Here’s some pictures of the different style carved shell that will go on the front of the chest;

    Tracing the design onto the carving blank with graphite paper and sawing out the rough shape.

    17 by Mike Allen, on Flickr



    18 by Mike Allen, on Flickr


    Layout for shaping the upper surface – it’s slopes from the high spot where dot/circle is down to the limit line 1/8" from the bottom of the blank. I do most of the shaping with rasps, files and sandpaper.

    19 by Mike Allen, on Flickr

    With shaping completed I redraw the layout lines and incise the lines that divide the convex and concave shape lobes. V- Tool establishes the line on the outer perimeter and a sharp knife for the narrower lines at the back of the shell.

    20 by Mike Allen, on Flickr

    21 by Mike Allen, on Flickr


    With the lobes divided, next step is shaping the upper surface of the convex lobes with a 3 – 5 sweep gouge held upside down.

    22 by Mike Allen, on Flickr

    Here’s a picture with every other, convex shape lobes completed, before starting on the shaping for the concave lobes.

    23 by Mike Allen, on Flickr

    Here’s the completed shell; for me the concave lobes are fairly straightforward and easy to shape. Getting the convex lobes a little more delicate. Finally, the toughest part IMHO is keeping the narrow dividing lines at the back of the shell, which are closely spaced together, from chipping out.

    24 by Mike Allen, on Flickr

    I’m not very good picture of the finished shell screwed to the front of the chest.

    25 by Mike Allen, on Flickr

  3. #3
    Join Date
    Feb 2011
    Location
    Carlsbad, CA
    Posts
    2,230
    Blog Entries
    2
    And some also not very good pictures of the completed chest.

    28 (2) by Mike Allen, on Flickr


    29 by Mike Allen, on Flickr


    31 by Mike Allen, on Flickr

    This is the 3rd time I built this design in different sizes and I’m not sure I would do it again – the Coopered, curved top is time-consuming to glue up and shape/surface because you can’t hold it securely on the benchtop without jigs. Also getting the dovetail top and bottom rails that surround the chest lined up so the simple but joint joining the vertical Stiles of the slides to the front/back all coordinated so everything goes together so that it fits, is also difficult for me to visualize in my mind’s eye and therefore problematic. A simpler, more traditional sort of chest construction is for me a lot easier and more fun to build.

    Thanks for looking,

    All the best, Mike

  4. #4
    Join Date
    Apr 2013
    Location
    Issaquah, Washington
    Posts
    1,320
    Holy expletive, Mike! Very nicely done; design, materials, finish, craftsmanship and attention to detail. Impressive piece without being overbearing.
    BTW-Great build presentation.

    Thanks for sharing.
    Last edited by Bill McNiel; 12-12-2017 at 9:10 PM.

  5. #5
    Join Date
    Oct 2005
    Location
    Wake Forest, NC
    Posts
    493
    Gorgeous! Love all the details in the chest and the details you included with your posts.

  6. #6
    Looks more like a retirement gift for an admiral who saved Western civilization ! But the design might get pirated.

  7. #7
    Join Date
    Nov 2007
    Location
    Edwardsville, IL.
    Posts
    1,673
    Now that's just plain cool. Beautiful work as always, Mike.

  8. #8
    Join Date
    Aug 2013
    Location
    Princeton, NJ
    Posts
    7,299
    Blog Entries
    7
    Beautifully done Mike!
    Bumbling forward into the unknown.

  9. #9
    Join Date
    Sep 2008
    Location
    N. Idaho
    Posts
    1,621
    Fabulous work Mike! (And the flowers were a nice touch!)

    How did you capture the bottoms of the trays? Were they grooved or simply rabbeted? I'm making some small trays for a jewelry box and will almost certainly just rabbet them.

    Best,
    Chris
    "You can observe a lot just by watching."
    --Yogi Berra

  10. #10
    Mike,
    Beautiful!
    ken

  11. #11
    Join Date
    Feb 2014
    Location
    Rural, West Central Minn
    Posts
    218
    Mike,
    Your having way to much fun. The coopered top, carvings, inlays and design are truly inspirational. Thanks for taking the time to share your build. BTW the flower arrangements look great and your tenon saw in the second picture did not go unnoticed, beautiful saw. Hope you and your neighbors are staying safe from the fires.
    Chet

  12. #12
    Join Date
    Jun 2013
    Location
    Neither here nor there
    Posts
    3,845
    Blog Entries
    6
    Amazing work! I love that miter saw, by the way. Also the shells are well done, and I will tell you in advance I am going to pirate that shell handle idea.

    Overall, I give this two thumbs... arrrr... make that one thumb and one hook up!

  13. #13
    Join Date
    Sep 2003
    Location
    South Carolina
    Posts
    1,429
    Absolutely stunning work, Mike. I would say I would pirate it as well, but truth be told, there are just too many firsts- coopered top, carvings, marquetry, string inlay- for me to do in just one project. Maybe someday!

  14. #14
    Join Date
    Feb 2011
    Location
    Carlsbad, CA
    Posts
    2,230
    Blog Entries
    2
    Quote Originally Posted by Malcolm Schweizer View Post
    Amazing work! I love that miter saw, by the way. Also the shells are well done, and I will tell you in advance I am going to pirate that shell handle idea.

    Overall, I give this two thumbs... arrrr... make that one thumb and one hook up!
    __________________________________________________ ______________________


    Malcolm,


    Thanks your kind, piratical comments (anytime you can work "arrrrh make that one thumb and one hook up" into a conversation you're definitely channeling Capt. Morgan!).


    BTW, I really enjoyed your earlier pictures of you and an adorable young lady in pirate gear – nice! I always enjoy your posts and hope your recovery from the hurricane is progressing.


    All the best, Mike

  15. #15
    Join Date
    Feb 2011
    Location
    Carlsbad, CA
    Posts
    2,230
    Blog Entries
    2
    QUOTE=Chet R Parks;2754115]Mike,
    Your having way to much fun. The coopered top, carvings, inlays and design are truly inspirational. Thanks for taking the time to share your build. BTW the flower arrangements look great and your tenon saw in the second picture did not go unnoticed, beautiful saw. Hope you and your neighbors are staying safe from the fires.
    Chet[/QUOTE]

    __________________________________________________ __________________________________________________ ____


    Chet,


    Thanks for your far too kind comments! My wife Sherrie is very "artistic" – she has some kind of weird knack I completely don't understand, for color/shapes/ textures. She's really good at photography, floral design and interior design; probably a big reason why for the first 10 years of our marriage most of my woodworking projects "somehow" never made it into the house, despite my best intentions.


    Those early furniture projects always somehow seem to be gifted to friends/family who "you know it doesn't really work for our house, but so-and-so (fill in the blank) I think would really appreciate it". A large percentage of my "shop furniture" today are projects I thought of as "quality furniture" when I built them back in the day, but in reality have ended up in the shop as places to store finishing supplies, camping equipment, etc. In all honesty, I have to admit she's always been right about my projects. Even though I've occasionally submitted projects to juried shows etc. (with no results speak of), it's 100% true her approval to put one of my furniture projects in the house is the highest compliment I could hope for


    The shop made backs saw in the picture you mentioned has a "Mexican Kingwood" tote. Probably one of the hardest woods I've ever worked. Although this saw turned out okay, I'm not planning to use that wood again. I'm at an age/physical condition where selecting "hand tool friendly" woods for my projects is the prime directive.


    As a native Southern Californian, we've always had fire seasons - not surprising given we live in arid/desert like environment. Even though this past winter was one of the wettest on record, the brush always dries out (it was 76° in San Diego today), and I'm amazed how quickly these wildfires spring up.


    I would think in this information age people couldn't be "surprised" by a fire in their area, but it happens all the time here. Couple years ago we were evacuated. Helicopters dropped fire retardant right in our house and 3 houses on our street were burned. I guess is as one of the reasons my boys are always nagging me to add some kind of "news alert" to my phone so we don't get caught by surprise. I guess my old school approach of just looking for the smoke on the horizon is not a very effective strategy.


    I hope you've been enjoying a nice fall season up your way. Always great to hear from you.


    Best, Mike

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •