My shop is small and located in the utility area...furnace and water heater. Typically, I don’t do any sanding inside, but when it gets to be in the teens tempurature wise outside, it just can’t be avoided. And I just can’t live with the Rigid canister running constantly. I don’t have a power sander with DC attachment, nor would I want to use it with the Rigid. Maybe time for a quieter small system.
I set up my air cleaner next to the sanding area and vacuum the filters from time to time during sanding.
A9F8AF0F-E7B0-4F7A-877D-D6A05943FE89.jpg
Gets about 90%, I suppose (?), but still leaves a layer of dust around the shop.
33CB4C95-BA1D-4914-9488-1B869581BC02.jpg
My HVAC guy, recommended a filter over the lower efficiency furnace intake...which I change after a sanding episode.
AA679C32-7A22-47CC-A730-8BACF172F34A.jpg
The whole shop will need a good cleaning when done.
I’ve considered a dust devil, but again, the canister is just too noisy and I really don’t even have the room for that. Anyone doing any creative DC in their shop that works?