I'm in the middle of a project that calls for many 6" long X 1 1/2" X 1 1/2" blocks of a variety of woods. Everything started out nicely square but wood movement and something I did wrong left me with slightly out of square blocks. Sorry... but I started with 8/4 rough lumber so the jointer, planer and tablesaw (all set properly) were used. Now I'm back in my comfort zone but I have one concern since these blocks need to be near perfect (chaos style end grain cutting board).
What is the best approach to squaring these smaller blocks. I was going to use my shooting board but realized that holding the small end to the fence without a clamp wouldn't work out very well. I don't have a clamping system for my shooting board.
Advice for an approach that has worked well for others would be appreciated.