Hello Creekers,
I'm working with a local hospital (Mercy Health Services) to try and match some material that they have long used to place donor names on.
The material is a 1/8" thick faux wood (cherry) veneer over a black substrate. See attached. The previous engraver went out of business and did not leave any sources for suppliers, so I am still sending out inquiries to try and match exactly what they already have used in the past. I've tried JDS, Johnson/Laserbits, and Gemini. The closest I can find is a faux birch veneer with black backing by Gemini duets. When I started this search I assumed this would be a common combination that would be easy to find, but have had no luck so far.
The birch colored alternative may be acceptable to them, but I thought I'd throw this out here on the forum to see if anyone has seen something like this.
Thanks!
IMG_0016.jpg IMG_0017.JPG