I have one I made previously but I, uh..., well let's just start over!
I previously used an oak runner, now going to use an Incra runner. Will again be made using 1/2" good plywood. Now for my questions:
1. Left miter track or right track? I have about the same usable distance either side so maybe a moot issue.., but using right miter gives more support to sled
2. Size? first one was 20"x30", this seemed pretty good, any reason to go, or not go, larger?
3. I like the fence on the leading edge, but am considering adding a clamp/hold-down or two on the fence. Thoughts or examples?
Will appreciate any and all thoughts and suggestions. Thanks