Hi all. My shop was expanded when I renovated my house. We removed a granite wall to allow me to use both sides of our carriage house (southern garage). But, I then had kids and the shop has languished for a long time. I am finally in the process of putting it back in good order. The following are a few shots of the current mess.
Picture one is the right rear of my shop. You can see the lumber storage, chop station, the drill press just sitting in some free space (mobile) and some Felder accesories on the wall.
Picture two shows the Felder combo, front doors of the right side, some shaper cutters and the dust collector. Note all the ductwork sitting on the floor, argh.
Picture three is the back left of my shop. My wife's scrollsaw is the first thing you can see, my bandsaw amid a huge mess of "stuff" including hoses on the floor. That area is just so messy and disorganized that I cannot bring myself to dive in and fix it yet. You can see some chisels and planes on magnetic holders as well. To the right of the chisels will be, next week, clamp storage. Also behind the bandsaw is the jet lathe.
Picture four is the left front of the shop. That is the door that serves as the front door. My bench is over there for now, but is on wheels and an adjust-a-bench, so just gets moved around as needed. Two Liegh jigs can sort of be seen on the wall. One is for dovetails and the other is the mortise and tenon jig. I bought the M&T and then stopped woodworking. So, I have yet to play with it much.
For now, that's my shop. I'll do a better tour once I have it set up a bit more.
I hope my pictures come through. I am not sure that I am handling the attachments correctly.
Reply With Quote