SawStop Overarm Dust Collector?

[Frank Pratt]

A good alternative if the amount of movement needed is limited. Another alternative to the overarm tube is two overhead hoses located apart for use with the saw when it is moved away from its usual spot.

Simon

At each location I have a 6" for the cabinet & a 2" for the guard.

[Roger Feeley]

I have an ICS with the overarm collector with the original fitting (I will have to look to see if it's 45 degrees or 90). I have it connected to a Penn State 1.5hp dust collector. I find it it very effective depending on what I'm doing. I'm not sure anything captures MDF dust.

I do find dust on the table. I also find it in the gap between the fence rail and table. I seldom sweep dust from in front of the saw. I seldom see dust on my apron. I have an air purifier but don't need it often and never because of the saw.

Does that help?