I'm having a few issues with my SawStop 3HP PCS and would appreciate any help you can offer. The blade seems parallel to the right miter slot within a few thousandths (maybe .003 +/-) and the fence is aligned to toe out about .003 at the back. I get pretty significant saw marks when ripping with a Forrest Woodworker 2 and Ridge Carbide TS2000. I also get saw marks when using my miter sled. I'm not sure what to check next. I used to get better results on my old Ridgid TS3650 with a Woodworker 2....so you can imagine my frustration! Thanks everyone.