Help! I cannot lower the outfeed table on my jointer. I've done it in the past no problem. I don't see any obstructions or foreign objects jamming up the works, I'm stumped.
The infeed table will lower freely, the outfeed table doesn't budge at all.
It's a 1980s Italian parallelogram jointer made by Ema. It may have been put together in Canada. I don't think there are that many out there, and I don't have and can't find a manual.
What do you think is the issue?
thanks, Mark Screen Shot 2018-10-01 at 11.51.47 AM.jpg Screen Shot 2018-10-01 at 11.53.20 AM.jpg