I am working on a small wall hanging cabinet. It is being built out of 1 x 6 poplar. There is a center divider which I want to attach to a horizontal to and bottom piece. In the attached, I used a scrap as a visual for the center divider. The spacing on the left board is 1" from the top of the horizontal and 1" from the bottom of the horizontal. The horizontal board on the right spacing from tje top of the board is 1 1/2" and 1 1/2" from the bottom of the board.
I am using Kreg 1 1/4" coarse screws. Do. You think the spacing between the outside pairs of screws is to close. Do you think another screw in the middle is necessary?
Thanks.