Hello... New to group and need some info about a Unifence. Bought a Unisaw to restore that came with a LONG rail and Unifence that I can't use in the basement so I will be adding a right wing to the table and will use a Jetlock with 44 inch rails I was able to get which will give me something more than 24" right of the blade. The Jetlock is supported by front and back rails so I can move the fence past the table. If I can find a shorter rail for the Unifence (I think I have the early version) I might consider using the Unifence, but as I have no room to add an extension table, does anyone know what right-of-blade cuts I can make or if this is a practical idea. If anyone has a shorter Unifence front rail I would be interested in considering buying and using if it's possible and not cutting down the longer rail I have which might be able to be used someday if I can get more space. The basement shop is so small I have to step outside to change my mind.