This is a small project, but I want to do it right the first time. I have a 4 post bed, one of the posts was knocked out of it's screw insert (the insert came out). The hole is too big and all I can think of is get a bigger insert (larger outside diameter,
diameter, no luck so far) or somehow epoxy the insert in place. But i'm having trouble believing big box stores will have an epoxy hard enough. What would you do? Yes, previous owner tried gluing the post together... I was also thinking of mixing epoxy with hardwood sawdust...

IMG_0362.jpgIMG_0361.jpgIMG_0363.jpg