I am considering adding the Makita cordless tracksaw to my collection, before pulling the trigger I have a question for those smarter than me. I already own a ts75 and three rails, so I obviously don't want to buy new rails for the makita. So I have read in the ts55 suplimental manual about the technique to "adjust" multiple saws to the same track but those were both festool saws and had adjustment screws. So my thinking is that if I buy all new strips and set them first with the makita then adjust the tS75 to fit the freshly cut rail then life should be good and I can interchange the saws on the same tracks, granted that is until I change any of the blades that result in diff kerf size. Now almost every time in the past were I have concocted these plans and assured my mind that things will work perfectly, then outlay a ton of cash only to find out I missed some obvious point and the plan falls apart. Has anyone done this before or can provide me some level of assurance before I pull the trigger? At minimum can someone who owned the cordless makita tell me if there is the possibility to adjust the blade to rail distance?
TomD