Helping my son trim out his new house, we have something like 350 lf of 6" base that needs to be trimmed. We both have 10" miter saws, but they won't do a 45 on 5.5" trim standing up against the fence. So a 12" saw is in order. Didn't want to spend a bunch so I was looking at HF. Then I stumbled across a 12" Dewalt DW715 on sale at Lowe's for $179.00. It is a single compound miter saw, but came with a 32 tooth blade. I added their combo pack of 32/80 tooth "construction" blades for $45. Not a bad deal. Not a slick slider, but I would have trouble fitting a slider in my miter saw station. Only downside I see so far is the goofy 1 5/8" OD dust collection chute. His Ridgid MS fit the Ridgid 2" ID hose nicely. Nothing a roll of masking tape can't fix.