My 15 year old Resaw King blade broke during routine use the other day and I decided it was time for a new one. Replaced it temporarily with a 3/4 Wood Slicer but they are not comparable. The RK is faster, and smoother. My old blade was 1" width and came with the Laguna SE14" saw. I never felt it belonged on a 14" saw, even though if any 14" saw could come close to tensioning this blade the SE could. It has been sharpened 3X. So be assured I ordered a 3/4" blade to replace it. BUT what does one do with a used broken blade such as this? The blade has several other cracks so repairing it is $ foolish. Does anyone know of any uses for a sharp carbide tipped blade pieces?