I have had this roughed out ash platter in the garage since 2015. Finally decided to give it a spin. It had a crack on the rim that I filled with a sliver of walnut bark. There was some minor cracking and some missing wood from the knot on the bottom side. I glued chips of walnut in the openings of the knot and filled the voids with walnut sanding dust. It finished out at 19 1/2 and about 1 1/2 deep. Rim is about 2 wide. Finish is wipe on poly.
DD8B4B22-1B8B-42BF-88B0-269C18BB5D30.jpg 260F114E-1B1E-4B74-A129-B08BA295767A.jpg