Hey guys!
I had a friend request a LED edge lit display sign and hopefully you can help me not reinvent the wheel
The sign will be about 9" wide and 12" tall
1/ Can I get away with 1/8" clear acrylic or does it need to be 1/4"?
2/ Does the depth of the engraving matter for how well the engraving shows up?
3/ Dose the edge on the LED need to be polished? And if yes, what's an easy way to do that? This is not something I plan on doing on a regular basis so I don't want to have to get any extra equipment.
Thanks in advance!