I apologize for asking a question that's already been asked, but I wanted to see whether opinions have changed. I'm also hoping for some definitive "you should buy this" type replies.
I will be receiving a Oneway 1640 in a couple of months and am having a difficult time deciding between chucks. I've narrowed the brands down to Oneway and Vicmarc. I'd love to hear the thoughts of those who have experience with both. I understand that the quality is similar, and I also understand that the Vicmarc has a sealed back that sets it apart. I figure I can't go wrong with either brand, but what I'd really like to hear is is which you'd buy if you had to do it all over again.
I'd also really appreciate if you could weigh in on which model of each brand you'd recommend. As I mentioned, I'll be using this chuck on a 16" lathe. I've only been turning for about a year and a half, and until now have only used the equipment of my instructor. In other words, I have very limited experience with different lathes and chucks. I like to turn smaller items like small salt bowls and chess piece sized spindle turnings, but would appreciate a chuck I could grow into if I start to get into larger items.
What do you think/which would you recommend?
Thanks in advance!