Following a lot of very helpful advice in a previous thread I ordered a Stronghold chuck, adapter and mega jaws on Monday and they came today, amazingly fast. I am having trouble with the chuck wrench, though. I put the adapter in and the jaws on, but then I found that while I could spin the chuck gear freely either way by hand, it would only turn in the inward direction with the wrench or key. I thought maybe I could have somehow put the mega jaws on wrong so I took them off again, but that didn't help. When I turn the wrench in the direction to open the jaws wider it binds up and will not turn, but it turns easily the other way. When I take the wrench out I can spin the chuck open and shut easily with my fingers. The parts that are together now were assembled when I got the chuck. I don't see anything that I could be doing wrong about how I am using the chuck or the wrench, there is only one way that they go together as far as I can tell. I will call the company I bought it from in the morning if there is a problem, as they're only open till 5, or if anyone has any ideas or experience with this problem that point to what I should be doing to make it work I'd be very grateful to hear. Thank you very much.
Zach