I am finishing up some Laundry Room cabinets that are plywood boxes with mdf face frames and panel doors. I am thinking of leaving the insides natural and painted the doors & frames.
My questions for the brain trust are:
1. What paint do you recommend for face frames and doors in this application? I would prefer to use the HVLP, as it's easiest to setup and clean. I do have a large, commercial airless but it's a PIA unless I use 5 gallon pails which I do not need.
I have a 30% discount at Sherwin Williams, but am open to whatever is available during these times.
2. What is recommended for the birch ply to keep the insides natural? Possibly something that is rolled or brushed as I prefer to do this finishing before assembly.
I searched the older posts for some info, but most are a while back and not dealing with the state of the world today.
I appreciate everyone's input.
Jimmy