I just purchased a Craftsman 113.23102C radial arm saw, but the table was missing, Does anyone have dimensions for the table pieces?
The saw isn't in bad shape overall; it had a bit of arbor runout, around .010" , so I replaced the bearings and turned the blade bottoming nut on the lathe, and trued up the blade stabilizer washers. Total runout 4 inches out from center is now .002 inches.
Everything else on the saw appears that it led an easy life; bearings are all tight and smooth. The only thing is someone "farmer spliced" the AC line cord, which was wired for 240V with an #18 AWG power cord. I replaced it with an 8 foot piece of #12 AWG, spliced it with solder, thick wall shrink tubing, and fit a 20A twist lock plug. I left it wired 240V as my tablesaw is wired for the same, and I have twist lock outlets handy in the shop.
Reply With Quote