SCM Shaper question

[Rick Fisher]

That makes sense Albert. I only think it moves 4.72" because that's what the LED reads. It travels from 4.72 to 0 and back again as it goes up and down. I will measure it ..

I will figure out the calibration of the LED and see what works best for me.

[Rick Fisher]

The owners manual for this machine is actually pretty good. The add-on Manual for the "Ready 3" controller is extremely lacking. It has some positive points, for instance they tell you what the error codes mean, Martin manuals don't, you have to call them and get a call back. As an evening woodworker, I've never liked that.

If anyone has a Ready 3 controller on an SCM machine, and is willing to answer some questions I would really appreciate it. I have put a service ticket in with SCM. See what happens.

Having said that, I like the machine. I will figure out how to post pictures and post some.

[Rod Sheridan]

FOG = Festool Owners Group ? : > )

Or, Felder Owners Group