Edit: No idea why they are upside down!
Critiques welcome!!!
So I've been looking to get into woodworking for the last couple years but I was always scared. I finally built up enough equipment that I knew I needed to start on something and I decided that I wanted to build some speaker stands. I ended up drawing these out last week on a notepad and after probably about 40 hours this is the finished product. I'm not sure what I'm going to do for finishing after I put the second coat of stain on. If you guys have any suggestions please by all means send them my way! I made some mistakes and my joints are a bit on the rough side but for a first project I think they came out all right.
IMG_2977.jpgIMG_2980.jpgIMG_2978.jpgIMG_2979.jpg