Anyone have a source for these blanks?
Screenshot 2021-04-14 094621.jpg
Anyone have a source for these blanks?
Screenshot 2021-04-14 094621.jpg
I don't, but you might consider making them yourself, I'm assuming you have the laser which would cut out the leather and the wood, rivets and a tool for them and brass keyrings are available online...
And while those antique-y rings on your samples look nice, you can't put keys on them...
========================================
ELEVEN - rotary cutter tool machines
FOUR - CO2 lasers
THREE- make that FOUR now - fiber lasers
ONE - vinyl cutter
CASmate, Corel, Gravostyle
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
The rings are solid, not split for keys.
Retired Guy- Central Iowa.HVAC/R , Cloudray Galvo Fiber , -Windows 10
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
Lol no the splits are hidden inside the leather strap. I found the source (alibaba vendor) and waited the 3 weeks to receive them. They're actually very nice pieces for blanks - and at under $2 landed, and considering I don't have a full wood shop, they fit the bill nicely. Got them in Koa and Walnut.
I can't build them for that cost. Care to share you secret spot???
Joe
JC Custom WoodWorks
For best results, try not to do anything stupid.
"So this is how liberty dies...with thunderous applause." - Padmé Amidala "Star Wars III: The Revenge of the Sith"