Results 1 to 14 of 14

Thread: Need to replace a spindle lock pin

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 07-15-2021, 6:57 PM #1
    Brian Kent's Avatar
    Brian Kent
    Brian Kent is offline [OP] Member
    Join Date
    Apr 2006
    Location
    Escondido, CA
    Posts
    6,224

    Need to replace a spindle lock pin

    The lathe is a Grizzly GO800, which is a Harvey Tool lathe, basically the same as a Laguna.

    User error - started up a 12" a 2" bowl blank while the spindle lock pin was still in. I have done this before while turning light objects and there was not a problem. This time the momentum ground the spindle lock pin into the spindle pulley and bent the spindle lock pin.

    This is not carried by Grizzly. I welcome other suggestions to replace the part.

    Grizzly P0835140 - SPINDLE LOCK PIN M16-1.5 X 48 V2.02.18
    Attached Images Attached Images
    Last edited by Brian Kent; 07-15-2021 at 6:59 PM.
    Veni Vidi Vendi Vente! I came, I saw, I bought a large coffee!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules