I found what look like spindles for a small shaper? Does someone recognize these?
IMG_6463.jpg
Thanks,
Mike
I found what look like spindles for a small shaper? Does someone recognize these?
IMG_6463.jpg
Thanks,
Mike
Last edited by Mike Stelts; 09-23-2021 at 7:58 PM.
They appear to be for a Delta.
"Only those who have the patience to do simple things perfectly will acquire the skill to do difficult things easily.”
Friedrich von Schiller (1759-1805)
"Quality means doing it right when no one is looking."
Henry Ford
They look like the ones I had on my 3hp Grizzly, 1/2", 3/4", and 1"
The other end will determine what they fit. The end shown is like my King Sealy by sears or my grizzly. diameter?
Bill D
The diameter is 39/64". The threads for the hold-down rod (can't see in picture) are 3/8-24. I looked at the parts catalog for a Delta shaper and it looks very similar; but, did Delta offer 1" spindles?
Last edited by Mike Stelts; 09-24-2021 at 9:21 AM.
My Grizzly 1+1/2 HP shaper the spindle nut top tang and bottom nut are metric. I assume the holddown bolt threads are metric as well.
39/64" = 15.5mm which seems unlikely.
Bill D.
Last edited by Bill Dufour; 09-24-2021 at 10:26 AM.
The imperial thread size, which I should have checked originally, is also a big clue.