Hey everyone, I thought I would get feedback from others using Trotec Ruby. The manual that is posted (rubyhelp.com) is basically non-existant and I'm hoping we can put our tips and ticks here.
1.) Ruby TIP: Install fonts on your Ruby host machine (windows computer at the physical laser) and reboot Ruby, you will have new fonts. I recommend https://webdevtrick.com/2300-fonts-pack-download-free/ tons of free fonts in his file.
2.) Ruby TIP: Rotary Position: It took me longer then i care to admit, but for those who dont know, the rotary starts at the position that its currently on (i.e. if the r-axis is at 0, it will reference the start point from there. Additionally on the "Prepare" page, the red line is R-axis 0, below the red line is positive R-values and above is negative. I.E. if you do not want it to rotate around, start your design below the red line.
3.) Ruby BUG: SVG files, imported will be distorted on the horizontal axis, when on the rotary... or at least that is the luck i have had.
I have more but ill post them later.