And a forest of clamps shows up....
Drawerbuilder 2, forest of clamps.JPG
Will let this mess sit overnight...and see how it looks in the morning.
I'm pooped....back is sore, had computer issues trying to process these photos.....
Stay tuned....
And a forest of clamps shows up....
Drawerbuilder 2, forest of clamps.JPG
Will let this mess sit overnight...and see how it looks in the morning.
I'm pooped....back is sore, had computer issues trying to process these photos.....
Stay tuned....
A Planer? I'm the Planer, and this is what I use
Clamps removed...found an issue..
Drawer and PIP, plugs made.JPG
Or, rather 2 issues. Back of the drawer has holes. Had some Rosewood scrap, and made two plugs...
Drawer and PIP, what holes.JPG
Problem solved. Front got planed smooth. Ends weren't too hateful..
Drawer and PIP, ends done.JPG
Question was whether 2 knobs were too much..
Drawer and PIP, 2 knobs.JPG
or just one..
Drawer and PIP, one knob or.JPG
Hmmm, decided one will be enough..cordless drill..
Drawer and PIP, cordless drill.JPG
Then a dab og glue and a clamp...
Drawer and PIP, clamp it, Jed.JPG
Let this sit a bit....then 1st coat of Amber Shellac..
Drawer and PIP, 1st coat of Shellac.JPG
Stay tuned...
A Planer? I'm the Planer, and this is what I use
While waiting....a look around?
Drawer and PIP, end view.JPG
The other end of the box...and
Drawer and PIP, back view.JPG
Hinge side..and..
Drawer and PIP, front view.JPG
A look at the front...have been letting this sit all opened up..
Drawer and PIP, airing it out.JPG
Don't want anything to get stuck...now do we...
Will add a second coat after a bit....Was still a bit sticky..
Stay tuned..
A Planer? I'm the Planer, and this is what I use
Have rubbed the box and drawer down a second time, with 0000 steel wool, AND a clean rag....not a real glossy finish...should be good enough to sit around in the shop.
Film when I can get it processed....
Stay tuned
Last edited by steven c newman; 02-12-2022 at 2:36 PM.
A Planer? I'm the Planer, and this is what I use
Ok..
Desktop Project Post, front view.JPG
Front view..
Desktop Project Post, drawer is open.JPG
Open the drawer..
Desktop Project Post, lid opened.JPG
Open the lid...
Desktop Project Post, lid closed.JPG
Top of the lid...
Desktop Project Post, end details.JPG
End details..
Desktop Project Post, underside.JPG
Underside of the box..
Desktop Project Post, end view.JPG
Other end of the box....
About 2 weeks to do....must be getting slow in me old age...
Thanks for looking in, from time to time..
Last edited by steven c newman; 02-12-2022 at 4:39 PM.
A Planer? I'm the Planer, and this is what I use
Box will be staying in the shop. Once a spot is cleared out for it at the "East End" of the bench.....all the pencils and other small layout tools will be headed there, as well.
Drawer will hold all the small hardware parts.....and a couple tools to install them with...
Just have to clean this spot out...
Messy Bench, bad corner.JPG
This MIGHT take a while to do....
A Planer? I'm the Planer, and this is what I use