Results 1 to 7 of 7

Thread: Band Saw tires

  1. #1
    Join Date
    Feb 2009
    Location
    San Diego, CA
    Posts
    241

    Band Saw tires

    I am in the market for new tires for my Jet 18".
    I found a (2019) thread about Blue Max tires from Band saw Tire Warehouse.
    No luck in finding that site.

    I did fine Urethane tires on "Sulphur Grove Tool site along with choices on Ebay.
    Any recommendations on the best replacement?

    Thanks, Robert
    Epilog Mini 24-45W, Corel Draw X6, Photoshop CS5, Multi Cam CNC

  2. #2
    Last edited by Dave Sweeney; 07-23-2022 at 7:24 PM.

  3. #3
    Join Date
    Mar 2018
    Location
    Piercefield, NY
    Posts
    1,695
    I had a Jet 18" saw from 2014 to 2021 and put the orange Sulphur Grove urethane tires on it as soon as I bought it, since the lower tire was falling apart. The tires were still as good as new when I sold the saw, even though I had cut a lot of wood and a fair bit of brass on the saw over the years. They had some scuffing or surface marks but no wear.

  4. #4
    Join Date
    Jan 2008
    Location
    Whidbey Island, WA
    Posts
    444
    Sulphur Grove Tool has good ones, I'd get them again.
    JonathanJungDesign.com

  5. #5
    Join Date
    Mar 2016
    Location
    Minnesota
    Posts
    78
    Woodworkers Tool Works. The owner is a member here.

  6. #6
    Join Date
    Feb 2009
    Location
    San Diego, CA
    Posts
    241
    Thank you all, I will check everyone and place an order
    Epilog Mini 24-45W, Corel Draw X6, Photoshop CS5, Multi Cam CNC

  7. #7
    Join Date
    Feb 2009
    Location
    San Diego, CA
    Posts
    241
    I ordered the tires from Sulphur Grove tool. Was surprised about how small they were. A good soak in very hot
    water and as many zip ties as I could install they were a fight to the finish as it was my first time installing band saw tires.
    Thought about removing the wheels but ended up doing it in place. The second tire took 1\3 the time.

    Appreciate all the help of this amazing group of experienced Wood Folk.

    Thanks, Robert
    Epilog Mini 24-45W, Corel Draw X6, Photoshop CS5, Multi Cam CNC

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •